MST RMX 2.5 RS 1/10 RWD Electric Drift Car Kit (No Body) Best Choice

MST RMX 2.5 RS RC Drift Kit | Pro Level Custom Features Built Your Way

The MST RMX 2.5 RS 1/10 RWD Electric Drift Car Kit offers a host of features drift enthusiasts want. The transmission allows either RMX or RRX style motor mount options. This gives the driver the option to choose upper or lower center of gravity positions as needed to suit the individuals needs. Two servo mounting positions are offered, with the option of choosing vertical or lateral servo mount positions to tune the weight bias. The servo mount positions bring with them two different battery mount options with an RMX 2.5 RS specific quickrelease carbon fiber battery holder. Combine this with multiple options for electronics placement and you have an incredibly tuneable chassis that can be setup in a variety of ways to suit various track conditions and driving styles. 

In addition to the placement of the components, the RMX 2.5 RS offers aluminum shocks with adjustable shock cap length, front & rear lightweight carbon shock towers, full aluminum suspension mounts, MB rear suspension, an included NS servo saver arm , an adjustable steering system for twostep Ackermann changes, as well as 6 degree KPI steering uprights, and .5 towing distance axle design and a high level of roll center adjustment options in the front and rear. All of these incredible features combined give you what you need to build an incredible chassis that can run the wall with the best of the best. 

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.  

Features:

• Rear spurgeardriving the gearbox can be adjusted between RMX and RRX drive modes 
• RMX 2.5 RS dedicated carbon deck 2.5mm
• Redesigned carbon fiber upper deck
• Aluminum shocks with adjustable shock cap length
• Front & rear lightweight carbon shock towers
• Full aluminum suspension mounts (front .0 / rear +0.5)
• RMX 2.5 RS dedicated quickrelease carbon fiber battery holder
• MB rear suspension included
• NS servo saver arm included
• Two install methods of motor mount – upper or lower center of gravity position
• Two install methods of servo – vertical or lateral position
• The adjustable steering system for twostep Ackermann changes
• 6 degrees KPI steering upright, and .5 towing distance axle design
• High level of roll center adjustment options in the front and rear, in both inside and outside positions
• Standard ball differential
• Steel CVD axle of rear transmission system
• Standard realistic caliper and disc shape brake set

Specifications:Class: 1/10 Drift CarDrive Mode: RWDWheelbase: 257mm(adjustable +mm)Hex to Hex Width: F178mm / R171mmCaster: Adjustable 6/ 8/ 10/ 12 degreesCamber: Adjustable 0 to degrees
Bearing: Full ball bearings
Shocks: Hydraulic damper set

Needed to Complete:

• Motor & ESC
• 2 Channel Radio System (minimum)
• Steering Servo
• Battery & Charger
• Drift Body
• Drift Gyro
• Drift Wheels
• Drift Tires
• Polycarbonate Paint for Body

This product was added to our catalog on February 17, 2022